For Volkswagen Wireless CarPlay & Android Auto Interfaces
SKU: BA-VW-MMI1
Symptoms
- Black screen
- Fuzzy lines
- Distorted or zoomed-in image
Step 1: Check Toggle Switches
- Important: Always disconnect the CAN Power Cable from the MMI box before changing toggle switch positions.
- If switches were changed while power was connected, the display will not work.
Toggle switch positions (0 = Up, 1 = Down):
| Vehicle / Screen Type | Switch Combination |
|---|---|
| VW 5.8" MIB | 110011 |
| VW 7" MIB | 111010 |
| VW 8" MIB | 110110 |
| Audi S3/A3 (2017–2018, 7") MIB | 111000 |
Additional Switches:
- Toggle 7: Down if no parking sensors fitted.
- Toggle 8: Down if using an external microphone.
Procedure:
- Disconnect CAN Power Cable for at least 10 seconds.
- Adjust toggles to match your vehicle.
- Reconnect CAN Power Cable and retest.
Step 2: Check LVDS & Wiring Connections
⚠️ Do not connect directly to the factory screen or unplug its cables. This will cause problems.
All connections must be made at the head unit (glovebox) using the LVDS splitter.
- Disconnect the LVDS cable from the head unit (normally pink/grey).
- Plug this cable into the female port of the LVDS splitter.
- Plug the splitter’s male end into the head unit.
- Plug the blue LVDS lead from the splitter into the MMI box.
- Confirm CAN Power Cable is fully seated in both the MMI box and quadlock.
- Ensure all wires (including climate control panel) are reconnected if “dry fitting”.
Step 3: Basic Function Tests
- Check if “EW-CarPlayxxxxx” appears in Bluetooth on your phone.
- Plug phone into supplied USB → confirm it charges.
If Issue Persists
- Take photos/videos of:
- Wiring connections
- Toggle switch positions
- Send to: support@bavarian-automotive.co.ukwith your order number.
Oct 3, 2025